A residual risk is the risk that remains on a machine after the machine has been designed in an inherently safe manner and the protective measures taken by the manufacturer; Regulation (EU) 2023/1230 on machinery requires the manufacturer to inform users of this risk. This regulation, which applies from January 20, 2027, makes this information the third and final step in reducing risk (Annex III, section 1.1.2, point b).

In short

  • Residual risk is what remains after design and safeguards; it cannot be addressed by information alone if a design or protection measure were possible.
  • The manufacturer informs users of the residual risks, indicates whether specific training is required, and indicates whether individual protective equipment is required.
  • It can be found in three places: the technical documentation, the warnings on the machine, the instruction manual.

What the text says

Annex III to Regulation (EU) 2023/1230, section 1.1.2, point b, requires the manufacturer to apply three principles «in the order indicated»: eliminate hazards or minimize risks through inherently safe design and construction; take the necessary protective measures for risks that cannot be eliminated; and «inform users of residual risks due to the incomplete effectiveness of the protective measures adopted; indicate whether specific training is required and indicate whether provision is necessary for the use of personal protective equipment.».

Three other passages draw the consequences:

  • on the machine : «When risks remain despite the integration of security, the adoption of additional protective measures and preventive measures, necessary warnings, including warning devices, are provided for» (Annex III, section 1.7.2);
  • in the instructions manual it contains «information on residual risks that persist despite the fact that safety has been integrated into the design» and that additional protective and preventive measures have been taken (Annex III, section 1.7.4.2, point l), as well as the protective measures to be taken by users, including personal protective equipment (point m);
  • in the technical documentation The description of the protective measures implemented shall include, «where appropriate, an indication of the residual risks associated with the machine or the related product» (Annex IV, Part A).
OPTIMA.ai illustration: summary of residual risk and machine safety.
The residual risk comes last: after conception and protection.

What this changes for the manufacturer and the operator

For the manufacturer

Each residual risk emerges from the risk assessment, once the first two steps have been completed. The manufacturer must be able to show that he first sought to eliminate the danger, then to protect it, before settling for merely informing. He then discards each residual risk, without forgetting, in the warnings affixed to the machine and in the manual: what risk, at what stage of life, what conduct to adopt, what training, what personal protective equipment.

For the operator

The employer who uses the machine assumes the residual risks announced in the notice for its own prevention work: workplace instructions, training, personal protective equipment, and transcription into the single risk assessment document.

An example

On an industrial band saw, the cutting part of the blade cannot be completely enclosed: it must reach the workpiece. The manufacturer has reduced the risk through design (adapted blade speed) and protective devices (adjustable protector closest to the workpiece, casing on the rest of the blade, quick stop). There remains a risk of cutting near the cutting area: this is a residual risk. It is indicated by a pictogram on the machine and described in the manual, with the instructions to adjust the blade guide as close as possible to the workpiece, the use of a push button for small parts and the required training. This example is fictitious and simplified.

Common mistakes

  • Going directly to the information : a pictogram or instruction in the instructions does not replace possible protection. The order in section 1.1.2 is mandatory.
  • Recognizing the residual risks in a generic list of warnings valid for all machines. The reader must find the risks specific to this machine.
  • Forgetting them in the instruction manual while they are included in the risk assessment: this is the defect that is least defensible.

Residual risk and danger: what difference?

The regulation defines danger as «a potential source of injury or harm to health», and risk as «the combination of the probability and severity of a lesion or harm to health that may occur in a hazardous situation» (Annex III, Part A). The saw blade is a danger. The risk of cutting, before any action is taken, is the initial risk. What remains after design and protection measures is the residual risk.

Related words: Intrinsic prevention, Risk reduction, dangerous phenomenon, dangerous situation, instruction manual, risk assessment (see our article) Machine risk analysis according to ISO 12100).

Frequently asked questions

What is the difference between initial risk and residual risk?

The initial risk, sometimes called the gross risk, is estimated before any reduction measures are taken. The residual risk is the risk that remains once the design and protection measures have been applied.

Where should residual risks be reported?

On the machine, by means of warnings and, if necessary, warning devices (section 1.7.2); in the instruction manual (section 1.7.4.2, points l and m); in the technical documentation, with the protective measures (Annex IV, Part A).

Can a residual risk be zero?

The regulation does not use this term. It requires that the risks that remain be communicated. When a design measure completely eliminates a hazard, there is no residual risk for that hazard, and there is nothing to be announced.

Sources

Current definition as of November 6, 2026. It does not replace the reading of the official text. Find our articles on the documentation machine.

By Philippe, regulatory expert at Optima AI. Do you report your residual risks in a notice? Optima Compliance, Our machine compliance offering helps you to write, control and maintain the documentation of your machines using your own documents.

30-minute exchange

Free, no commitment. With our customer relations manager, via video conference, on the task, the file or the machine of your choice.

Select a time slot

The booking opens in Google Calendar, in a new tab.

Would you prefer to write to us?

Optima AI SAS processes this information to answer your request (pre-contractual measures taken at your request) and to ensure commercial follow-up (our legitimate interest). It is kept for 3 years from the last contact from you. You can access it, correct it, have it deleted, and object at any time to its use for prospecting purposes by writing to contact@optimaai.fr. Privacy policy