The EU incorporation declaration is the document, drawn up and signed by the manufacturer of a quasi-machine, which attests that compliance with the relevant essential health and safety requirements of Regulation (EU) 2023/1230 has been demonstrated, specifies which are applied and fulfilled, and indicates that the quasi-machine must not be put into service until the final machine has been declared compliant. It is provided for in Article 22 of the Machinery Regulation, which applies from 20 January 2027, and replaces the incorporation declaration of Directive 2006/42/EC.

In short

  • She accompanies a quasi-machine, Never a complete machine, which, in turn, receives an EU declaration of conformity.
  • It follows the model of Annex V, Part B, and lists the essential requirements that the manufacturer has addressed.
  • It is supplied with the assembly instructions or is accessible via an internet address or a machine-readable code (Article 11, paragraph 8; Annex XI, point 3).
  • It does not entitle the machine to bear the CE marking under the Machinery Directive: it is the integrator who will affix it to the final machine.

What the text says

« The EU incorporation declaration attests that compliance with the relevant essential health and safety requirements set out in Annex III has been demonstrated » (Article 22, paragraph 1). « The EU incorporation declaration is drawn up in accordance with the model set out in Annex V, Part B. It is continuously updated and translated into the language or languages required by the Member State in which the quasi-machine is placed on the market or made available on the market » (paragraph 2). By establishing it, the manufacturer « assumes responsibility for the conformity of the quasi-machine » with the regulation (paragraph 4).

The word «relevant» counts: the requirements applicable to a quasi-machine «do not cover those that can only be satisfied at the time of incorporation» (Annex III, point 1.1.1). The declaration is established only once it is demonstrated, in the technical documentation of Annex IV, Part B, that these requirements are met (Article 11, paragraph 2).

What it contains

The model in Annex V, Part B, includes nine sections:

  1. the quasi-machine (product, type, model, batch or serial number);
  2. the name and address of the manufacturer and, where applicable, of its representative;
  3. the mention «This declaration of incorporation is drawn up under the sole responsibility of the manufacturer»;
  4. the object of the declaration, identified to ensure its traceability, with a colour image if necessary;
  5. the essential health and safety requirements of Annex III that are applied and fulfilled, the indication that the technical documentation has been prepared in accordance with Annex IV, Part B, and, where applicable, compliance with other Union harmonisation legislation;
  6. the harmonized standards or common specifications applied (with their date), or the other technical specifications (with their date), specifying the parts applied when they were applied only partially;
  7. the commitment to transmit to the national authorities, upon duly motivated request, the relevant information regarding the quasi-machine, with the transmission modalities, without prejudice to the manufacturer's intellectual property rights;
  8. the mention that the quasi-machine «is not put into service until the final machine in which it is to be incorporated has been declared compliant with this regulation»;
  9. additional information, then signature: by and on behalf of whom, date and place, name and function.

What this changes for the manufacturer and the integrator

The manufacturer of the quasi-machine Draws up the technical documentation, then the declaration, and provides the assembly instructions (Article 11, paragraphs 2 and 7). He keeps the technical documentation and the declaration at the disposal of the authorities for at least ten years after the placing on the market (paragraph 3); a digital declaration remains online for at least the same length of time (paragraph 8). The importer keeps a copy for the same period (Article 14, paragraph 7) and the distributor verifies that it accompanies the nearly-machine (Article 16, paragraph 2, point a).

The integrator Read section 5 as a boundary: what the manufacturer of the quasi-machine has treated of on one side, what remains for him to treat on the other. The manufacturer who incorporates the quasi-machine and puts the final machine on the market, or puts it into service for his own use, is the manufacturer (article 3, point 18). He assesses the risks of the whole, conducts the conformity assessment procedure, draws up the EU declaration of conformity and affixes the CE marking.

OPTIMA.ai image - Declaration of incorporation or compliance for final machine.
Semi-machine or final machine: the statement that changes.

An example

A manufacturer sells a motorized rotating table, delivered without controls or protective devices, intended to be integrated into assembly stations: it is a quasi-machine. Its declaration of incorporation lists the requirements it has addressed, such as the stability of the table and its handling information, and does not mention those that depend on the final station, such as the choice of protection against moving elements (Annex III, points 1.3.7 and 1.3.8). The integrator thus knows, from the very first reading, what he must cover in his risk assessment.

Common mistakes

  • Writing «all the requirements» without listing them: section 5 requires that you specify which ones are applied and completed.
  • Forget about section 8, the prohibition of putting the machine into service before the final declaration.
  • Delivering the declaration without the assembly instructions The assembly instructions contain the declaration or the means to access it (Annex XI, point 3).

What difference does the EU declaration of conformity make?

The EU declaration of conformity (Article 21) concerns a complete machine and precedes the CE marking; the declaration of incorporation concerns a quasi-machine; it covers only the relevant requirements, lists them, and refers the rest to the integrator.

Related words: quasi-machine, EU declaration of conformity, assembly instructions, essential health and safety requirements, harmonized standard, and our article on CE marking of a machine.

Frequently asked questions

What changes compared to the incorporation declaration of the directive?

Compared to Directive 2006/42/EC, the model of the regulation no longer requires «the name and address of the person authorized to draw up the technical dossier» (Annex II, Part 1, section B), and the ten-year retention period runs after the placing on the market (Article 11, paragraph 3), and no longer after «the last date of manufacture» (Annex II, point 2).

Who draws up the incorporation declaration?

The manufacturer of the quasi-machine, under its sole responsibility, with the signature of a person acting on its behalf (Annex V, Part B, sections 3 and 9). It is not up to the integrator to draft it.

What does the integrator do with the unfulfilled requirements?

He processes them himself: as the manufacturer of the final machine (Article 3, point 18), he is responsible for all the essential requirements applicable to the whole product, relying on the assembly manual, and then draws up the EU declaration of conformity.

Sources

Current definition as of November 6, 2026. It does not replace the reading of the official text. Find our articles on the documentation machine and our webinar Machine Regulations 2023/1230: What changes on January 20, 2027.

By Philippe, regulatory expert at Optima AI. Are you preparing the documentation for your machines and quasi-machines, as a manufacturer or integrator? Optima Compliance, Our machine compliance offering helps you draft, control, and keep these documents up to date based on yours. The declaration remains under your signature: Optima Compliance does not sign it and does not issue any certificate.

30-minute exchange

Free, no commitment. With our customer relations manager, via video conference, on the task, the file or the machine of your choice.

Select a time slot

The booking opens in Google Calendar, in a new tab.

Would you prefer to write to us?

Optima AI SAS processes this information to answer your request (pre-contractual measures taken at your request) and to ensure commercial follow-up (our legitimate interest). It is kept for 3 years from the last contact from you. You can access it, correct it, have it deleted, and object at any time to its use for prospecting purposes by writing to contact@optimaai.fr. Privacy policy